Black Elite Harley-Davidson EZ-PULL Clutch Lever System

 

Handlebar Fitmit: Elite EZ-PULL clutch and brake levers fit aftermarket handlebars. Will also fit if you are still using your stock Harley-Davidson controls.

 

 

 

Here at Elite Mototech, we strive to build the best parts available and with the Elite Mototech Harley Davidson EZ-PULL clutch lever being the first of its kind, we have made a massive impression in the performance Harley Davidson world.

 

The 2x Patented Harley-Davidson EZ-PULL Clutch Lever is a highly precision CNC machined lever with an innovative design while providing the ultimate function. These are made from 6061 aluminum using only the best materials manufactured in the U.S.A. and of course, the parts themselves are also manufactured right here in the United States of America.

 

Our levers and lever components are anodized in a variety of colors so you can customize them to your liking. All anodizing color work is sealed using nickel acetate sealer with an Anti-Fade agent. Our anodizing has been rigorously tested against the harsh sun in the sunniest cities in America and to this day some of our original parts are still looking just as good as new. We have gone the extra mile to make sure our product is perfect, from the smooth look and finish to a smooth operating lever.

 

 

Our 2x patented easy pull clutch lever offers 30% less force to pull over the stock lever while utilizing the stock Harley Davidson clutch cable without modification and works on all Harley Davidson models with the eye or loop style cable. All our clutch levers come standard with all stainless-steel hardware; two high-quality sealed ball bearings are pressed into the lever itself while using a proprietary custom-made pivot bolt to secure it into the perch body. We have machined two small reservoir pockets into the lever itself to hold lubricant in the lever and perch body, thus keeping a long-lasting smooth feel and prolonging Routine maintenance. The Elite Mototech clutch lever only takes minutes to install without the need to disassemble our lever/perch assembly, unlike stock.

 

There are two different clutch lever lengths to choose from, the Stubby 1 3/8" and Shorty 2” are approximately 2” overall shorter than the stock Harley Davidson levers. These measurements are taken from the inside edge of the switch housing where it meets the grip. These measurements allow you to get an exact idea of where your lever would sit allowing you to choose the correct size for your riding style. There is an option for a mirror/blinker mount that can be flipped 180 degrees to either lower or raise the mirror/blinker. Beneath the mirror mount is a set screw to adjust the reach of the lever for those riders with shorter fingers looking for a little more comfortable lever position.

 

With the 1” handlebar being standard on all Harley Davidson models, we also offer a 7/8” option for those riders looking to change their bar to a Motocross handlebar. If you are unsure of your bar size, chances are you have 1”. Using a caliper set to measure the diameter of your handlebars is the easiest and most accurate method. If you do not have access to a caliper set, use a piece of string or paper for same results, wrap around the diameter, mark and measure.